From the United States to Costa Rica. Without the runaround.Your final price in colones

Guides

Mazda parts in Costa Rica: Mazda2, Mazda3, CX-5 and BT-50

Updated November 18, 2026 · AutoPartes.cr

Quick answer

On the Mazdas most common in Costa Rica, like the Mazda2, Mazda3, CX-5 and BT-50, the parts replaced most are brake pads and rotors, shock absorbers, bushings, spark plugs, ignition coils, engine mounts and filters. The Mazda3 and CX-5 are sold in the US; the BT-50 isn't, so we check every part with the VIN.

Mazda is one of the best-loved Japanese brands in Costa Rica. You see the Mazda3 in every town, the Mazda2 is a very common first car, the CX-5 has become a family SUV favorite and the BT-50 pickup works on farms and building sites. They all deal with traffic, steep hills, potholes and rain, and that wears out the same parts. Here's which ones, which models are easiest to source in the US, and what we need to quote you the right part.

Which Mazda model and generation do I have?

The badge on the trunk or tailgate tells you the model, but the VIN confirms the generation. Almost every engine, suspension, body and lighting part changes from one generation to the next.

Model Type Sold in the US?
Mazda2 Small hatchback and sedan Only some years
Mazda3 Sedan and hatchback Yes, since its first generation
CX-3 and CX-30 Small SUVs Yes
CX-5 Midsize SUV Yes, since its first generation
BT-50 Pickup No

Costa Rica has dealer-sold Mazdas and others brought in used from the US, Japan or elsewhere, and they don't always share parts even when they look identical. That's why we never quote on model and year alone: the VIN or chassis number tells us exactly what yours has.

Which Mazda parts get replaced most?

Brakes, suspension, ignition and service parts top the list, as on almost any car that spends its life in city traffic and on rough streets:

  • Brakes: front pads and rotors, plus rear pads or shoes depending on the version.
  • Suspension and steering: shock absorbers, control arm bushings, ball joints, tie rod ends and sway bar links, which tend to clunk over potholes.
  • Ignition and engine: spark plugs, ignition coils, engine mounts, oxygen sensors and other sensors.
  • Filters: oil, air, cabin and fuel.
  • Cooling and electrical: radiator, thermostat, water pump, alternator, battery and A/C compressor.
  • Clutch: the full kit on manuals, which are fairly common on the Mazda2, Mazda3 and BT-50.
  • Body and lights: headlights, taillights, mirrors and bumpers after a scrape or a knock.

If your brakes squeal or the pedal feels different, read when to replace brake pads and have your mechanic check them before you buy anything.

Are Mazda parts easy to find in the US?

For most models, yes. The Mazda3, CX-5, CX-30 and CX-3 are or were sold in the US, and there's a good supply there of genuine Mazda parts and reputable aftermarket brands.

There are two cases where we check more carefully:

  • Mazda2: it was sold in the US for only some years, so depending on the generation some parts are easier to source than others.
  • BT-50: never sold in the US. Some service parts can be matched by size or part number, but many model-specific parts are harder to find there.

In those cases we look up the part number, confirm the fit, and if a part can't be sourced reliably we tell you in the quote before you pay anything.

Does the engine, or gas versus diesel, matter?

Yes, a lot. The same Mazda model can carry engines of different sizes depending on the year, trim and country of origin, and the BT-50 comes in diesel versions. Spark plugs, coils, filters, sensors, engine mounts and cooling parts all change with the engine.

The transmission (manual or automatic) and the drive (2WD or 4x4) matter too. For brakes and suspension, always tell us whether the part is front or rear, and which side.

What should I send to get a quote for a Mazda part?

The more detail, the lower the risk of ordering the wrong part. Send us:

  1. The model: Mazda2, Mazda3, CX-5, BT-50 or another.
  2. The year of the car.
  3. The engine: the displacement and whether it's gasoline or diesel.
  4. The transmission and drive: manual or automatic, 2WD or 4x4.
  5. The body style: sedan or hatchback, for body or lighting parts.
  6. The VIN or chassis number.
  7. A photo of the old part, its label, or where it goes, if you don't know its exact name.

If your mechanic has already told you which part is failing, ask them to confirm its name or part number. And if you're unsure about a noise or fault, have them diagnose it before you order.

In short

On Mazdas, brakes, suspension, ignition parts, engine mounts and filters wear out most, and almost everything changes with the model, generation and engine. Mazda3 and CX-5 parts are easy to source in the US; with the Mazda2 and BT-50 we confirm every part before buying. If your Mazda came used from Japan, see how to order parts for Japanese import cars, and if you're not sure where the number is, here's where to find your car's VIN. When you're ready, request your free quote: we'll send you the total price in colones, no commitment.

Frequently asked questions

Can you get parts for a Mazda BT-50?

In many cases yes, but since the BT-50 was never sold in the US, some parts are harder to find there. We check with the VIN and tell you in the quote before you pay anything.

Do US Mazda3 parts fit a Costa Rican Mazda3?

Often, especially service, brake and suspension parts, but not always: the engine and equipment can differ by country. That's why we confirm every part with the VIN.

Do you have Mazda parts in stock?

No. We import each part to order from the United States. It usually arrives in 1 to 3 weeks.

How much does it cost and how do I pay?

The price depends on the part, its weight and size, and includes shipping, freight, duties, IVA and our service. You pay 50% when you accept the quote and the rest when you receive the part.

Get a quote